Learning Objectives/Experiments

5. PLC Programming Facility through P.C. 
5. The device can simulate the work condition of an industrial elevator.

Features

• The device can simulate the work condition of industrial elevator. And complete lift, open-close door.
• The system is composed of operation parts, car, control part, floor indicator and PC interface. Working part contains a variety of industrial transmission device, industrial sensors, which can simulate the real structure of the elevator doors on/off. The control part adopts three control methods: PLC, PC, and MCU, to complete the control of the whole system running.
• On the control panel has PLC control input/output interface and PC communication interface (Without PLC host computer).
• PIC Microcontroller Motherboard for control Elevator
•  Working voltage: 230V AC / 0-10V DC and Potentiometer, Start-Stop Switch, reverse-Forward switch & MCB for mains ON-OFF with indicator Lamp.

Specification/Technical data

• Complete lift,
• Open-close door.
• The system is composed of operation parts,
• Control part,
• Floor indicator
• PLC interface. Working part contains a variety of industrial transmission device,
• Industrial sensors,
• The control part adopts two control methods
• PLC Control
• PIC Microcontroller Control
• To complete the control of the whole system running.
• On the control panel has PLC control input/output interface
• Microcontroller control input/output
• Training Included
• User Manual
• Delta PLC Operated
• Microcontroller Operated
• Input/ Output Terminal
• Input /Output Indicator
• Optional Computer, computer table

Dimensions and weight

5. Weight: approx. 80kg
5. Dimension: 310×300×580mm
5. Input power: single-phase, three-wire AC 220V±10% 50Hz/60Hz
5. Output power: DC 24V safety terminal output