• PLC Pick & Place using Pneumatic Gripper Module:
•  Base Plate: Aluminium Profile
•  Structure: Aluminium Profile
•  Function Indicator: Tower Type (Red, Green, Yellow)
•  Carry Function: Using pneumatic gripper method
•  Pneumatic cylinder: 02 Pcs (Maximum)
•  Optical Fiber Sensor:02 set (Maximum)
•  Solenoid Vaulve:3 pcs (Maximum)
•  Cabinet control circuit power supply: DC24V
•  Temperature: -10 ~ 40; Humidity: ≤90%;
•  Air pressure: 0.4 ~ 0.6Mpa
•  Input power: single-phase, three-wire AC 220V±10% 50Hz/60Hz
•  Connection facility 2mm & 4mm Safety Socket
•  Module Dimension: L x W x H (mm):599 x 459 x 19 (minimum)

• Water Pump Control Module:
• Base Plate: Aluminium Profile
• Water Chamber: Upper & Lower
• Water through: Solenoid Valve
• Water Pump: 5WMax.
• Operating Voltage:24VDC Max.
• PLC Connection facility 2mm & 4mm Safety Socket
• Dimension: LxWxH (mm):599x459x19 Approx

• Fire Indication System Module:
• Smoke Sensor
• Interfacing PLC and DC power supply Connection facility
• Interfacing facility with water level control Module
• PLC Connection facility 2mm & 4mm Safety Socket
• Operating Voltage: 24VMax.
• Dimension: LxWxH (mm):294x224x44 Approx

• Traffic Light Control Module:
• Built-in, Green, Yellow, Red Indicator for interface PLC and DC power supply Connection facility
• PLC Connection facility 2mm & 4mm Safety Socket
• Operating Voltage: 24VMax.
• Dimension: LxWxH (mm):294x224x44 Approx

• Pneumatic Control Module:
• Pneumatic cylinder: 3EA Min.
• Temperature: -10-40
• Humidity: 90Approx.
• Air pressure: 0.4-0.6Mpa
• PLC Connection facility 2mm & 4mm Safety Socket
• Dimension: LxWxH (mm):294x224x44 Approx

• Pneumatic solenoid valve Module:
• Pneumatic solenoid valve: 3EA(Minimum)
  Operating Voltage: 24V
• PLC connection point: 3EA(Minimum)
• PLC Connection facility 2mm & 4mm Safety Socket
• Module Dimension: L x W x H (mm):294 x 224 x 44 (Minimum)

• Interfacing facility Pneumatic control Module
• Relay Control Module:
• Double pole Double Through Relay: 04 Set Min.
• Relay Operating Voltage:24V
• PLC Connection facility 2mm & 4mm Safety Socket
• Dimension: L x W x H (mm):294x224x44 Approx

• Motor Starter module:
• Magnetic Contact switch:02 no’s
• Star Delta Status Indication facility
• Relay Operating Voltage:220VAC
• PLC Connection facility 2mm & 4mm Safety Socket
• Dimension: L x W x H (mm):294x224x44 Approx

• Input Switch Module:
• Pushbutton Switch:04 Nos
• Push on Push Off Switch: 04 Nos
• Relay Operating Voltage:24VDC
• PLC Connection facility 2mm & 4mm Safety Socket
• Dimension: L x W x H (mm):294x224x44 Approx

• Sensor module:
• Proximity Sensor:02 Nos
• Photo Sensor:02 Nos
• Thermocouplar:02 Nos
• Operating Voltage:24VDC
• PLC Connection facility 2mm & 4mm Safety Socket
• Dimension: LxWxH(mm): 294x224x44 Approx.

• Output Indicator Module: 04 Nos
• Operating Voltage:220VAC
• PLC Connection facility 2mm & 4mm Safety Socket
• Dimension: LxWxH(mm): 294x224x44 Approx.

• Variable Frequency Drive Module: 1 No
• Input Three Phase/Single Phase
• Output Three Phase 220VAC (PWM)
• Capacity:400watts Min.
• Input Operating Voltage:220VAC
• PLC Connection facility 2mm & 4mm Safety Socket
• Dimension: LxWxH(mm): 294x224x44 Approx.

• Three Phase Induction Motor Module:1 Nos
• Connection system: Delta
• Input Operating Voltage:220VAC
• PLC Connection facility 2mm & 4mm Safety Socket
• Dimension: LxWxH(mm): 294x224x44 Approx.

• Stepper Motor Control Module:
• Unipolar Stepper Motor:01 No
• Bipolar Stepper Motor:01 No
• Input Operating Voltage:5V/12V
• PLC Connection facility 2mm & 4mm Safety Socket
• Dimension: LxWxH(mm):294 x 224 x 44 Approx.

• Seven Segment Display module: 02 No
• Input Operating Voltage:5V/12V
• PLC Connection facility 2mm & 4mm Safety Socket
• Dimension: LxWxH(mm): 294x224x44 Approx.

• Power Supply Module:
• Input Operating Voltage:220VAC
• Output AC Voltage:220V,50Hz
• Output DC Voltage:5V(1Amp),12V(1Amp),24V(1Amp)
• PLC Connection facility 2mm & 4mm Safety Socket
• Fuse for Safety protection facility Socket.

Specification/Technical data

• Air Compressor-01
• Connecting jack 2mm/4mm:01Set
• Power Cable:01
• PLC to PC Communication cable:01 Set
• Simulation software for compatible PLC
• Connection facility are 2mm & 4mm Safety Socket

• NOTE: COMPUTER NOT IN OUR SCOPE OF SUPPLY

Dimensions and weight

5. Weight: approx. 100kg