INTRODUCTION
Shock Absorber Field Testing Unit is new test bench concept for resistance checking of the sealed shock Absorbers used in automobiles. The Test rig is designed as per IS to carry out resistance checking of sealed Shock Absorbers and it has proven its efficiency in reputed service centers and companies. The measuring equipment incorporated in the test rig allows to measure tension and configuration of the
drive, Operating and measuring equipment allows the equipment to run trouble free and vibration free.
DESCRIPTION
The basic set up consists of Motor, Gear Box with appropriate gear ratio to obtain desired speed, eccentric mechanism, reciprocating ram, fixtures and control panel. Depending upon the linear velocities requirement it is possible to adjust the stroke by
adjusting eccentricity. The Shock Absorber under test is clamped on the fixtures mounted on the reciprocating ram. The control panel attached to the main set up consists of a peak hold indicator, which facilitates direct reading of tension and compression values of the resistance offered by the shocker under test. The timer provided in the control panel automatically stops the machine after completion of 10 cycles. The equipment is provided with caster wheels so as to have mobility.
FEATURES
1. Compact design.
2. Easy loading and unloading of shock Absorbers under test.
3. Quick changing clamps with universal adopters.
4. Stable test conditions.
5. Control panel on test rig.
SPECIFICATIONS
1. Maximum Load : 200 kg.
2. Test piece Length : 400 mm.
3. Velocity : 0.2 m/s
4. Test Speed : 100 RPM fixed.
5. Drive Motor : 3 H.P. AC. Induction.
6. Load Measurement Accuracy : +/- 1.0% FSD
7. Approx Weight : 150 kg.
STANDARD SCOPE OF SUPPLY
1. Peak Hold Load Indicator and Sensor.
2. Timer adjustable to 10 sec.
3. Anti vibration mounts.
4. Caster wheels.
5. Quick stroke changing mechanism.
6. 1 No. Instruction Manual.
7. 1 set of fixture suitable one type of shock Absorber. Tray to keep fixture and samples.
