Oil Hydraulic Circuit Trainer:
Unit consists of following components and accessories for carrying out the study of various hydraulic components and hydraulic circuits. All these accessories are mounted on a M.S fabricated frame. Power Pack:
• Oil Sump Capacity: 40 litters.
• Pump used: Geared type, 5 – 8 LPM capacity with 30 Kg/cm2 pressure (Working pressure).
• Motor: 1 or 2 HP single phase motor / three phase motor.
• Suction strainer: 1 No.
• Air Breather: 1 No.
• Pressure Gauge: (0– 100 Kg/cm2) 2Nos.
• Quick release coupling with double check
valves: 6 sets.
• 4/3 way Tandem Centre Direction control Valve:
• Pressure Reducing Valve: 1 No.
• Pressure Release Valve: 1 No.
• Simple Throttle Valve: 1No.
• Pressure Compensated Valve: 1No.
• Single Acting Cylinder: 1 No.
• Double Acting Cylinder: 2 Nos.
• Hydraulic Motor: 1 No.
• Flow Control Valve with built in Check Valve: 1No.
• Sequence Valve: 2 Nos.
• Pressure Gauge: (0-100 kg/cm2) 1No.
• Necessary Hydraulic High Pressure Hoses for building circuits.
• High Pressure Seamless piping wherever necessary.
• Suitable High Pressure Connections with ferruled nuts of heavy metal for hydraulic circuit components and hoses.
All these accessories are mounted on a M.S fabricated frame
• Study of Direct operated pressure relief valve.
• Study of flow control valve.
• Study of Pressure Reducing valve.
• Study of Directional control valve.
• Study of hydraulic motor.
• Hydraulic cylinders sequencing circuit.
• Regenerative Circuit.
• Meter in circuit for cylinders.
• Meter out circuit for cylinders.
• Pump unloading circuit.
• Bleed off circuit for cylinders.
• Speed control circuit of a hydraulic motor.