laboratory vertical autoclave

LABORATORY VERTICAL AUTOCLAVE:

Precise De-greased & Pre located outer MS sheet chamber duly powder coated & painted.
Better mineral / glasswool Insulation keeps the surface Temperature normal & avoid heat / steam loss.
Unique design of Radial locking for minimum steam loss, assure accurate steam generation / sterilization
S. Steel 304 grade argon welded Cylindrical inner Tank/Vessel having S. Steel tubular immersion heater for steam generation.
Lid is made of Thick mild S.S. Lined for double protection
Optional : All S. Steel Thick Lined Lid/ S.S. Ring 304 grade (All outer S. S. outer Body -304 grade Steel On Customer request)
Fitted with Painted mild steel Ring & Radial locking duly chrome plated.
Paddle lifting device is also provided.
Lid is having built in safety valve, Release Valve Pressure gauge, water level / Indicator
Supplied with S. Steel cylindrical basket.
Pressure range is adjustable from 5PSI -20PSI " 3 PSI or better
Optional
- Pressure control switch
- Automatic low water Cut off Device/ with Alarm
- Timer 0-60 minute.
- Digital Indicator/ Digital Timer 0-999 Min/Hrs.

Applications :

Technical Parameters :

Pressure Range	: 5-20PSI ±3PSI
Temperature Range	: 120°C approx. at 15-20 PSI approx.
Power Consumption	: 220/230V AC ±10% Single Phase 50Hz
Control Panel	: Temp. / Pressure Indicator, Pressure Switch
Optional	Timer 0-60 minute Digital temperature controller cum incubator

Specifications :