Introduction: It is essential to measure the elongation of test specimen under load, to have it's mechanical properties. So that the knife edges bite the specimen to avoid any slip. The upper edges are adjustable to provide different gauges lengths for measurement. As deformation takes place the lower knife edges transfer the movement to the dial gauges and the deformation of specimen is shown on dials, so that the change in length of specimen by 1/10mm, equals to one division of the graduation on dial.
Measuring Range : 0 to 3 mm
Least Count : 1/10 mm
Gauge Length (Adjustable) : 30 to 120 mm
Thickness or diameter of specimen : 1 to 20 mm
Dimensions - B x D x H : 120 x 50 x 150 mm Approx.
Net Weight : 0.3 kg Approx.
Send us Enquiry
Office: S. N. 37/02, "Ashtavinayak Indl. Estate",
Parvati Nagar, Dhayari Narhe Road,
Next to Pari Robotics, Narhe, Pune-411041
Tel fax: (020) 24690312, Email: firstname.lastname@example.org, email@example.com