LABORATORY HOT PLATE:

• Unique design of outer MS body having powder coated with gap of cast Iron top from the body
• Kanthal A-1 superior quality coil shaped heater duly embedded in the cast Iron plate to avoid heat loss having Cera Blanket Insulation
• All electrical connection are fire proof having sleeve for Heat/Temperature Protection
• Temp. Range is from Ambient to 300°C
• Temp. Controlled by sunvic Energy Regulator having marked 0-100, at minimum position it release minimum energy & at max. position it release max. energy
• Cast Iron top is having 7.5” Diameter having heat resistant Paint
• Optional : Can be supplied with Thermostat control in place of ER

Technical Parameters :

• Control Panel: Energy Regulator, Temp. Indicator & Load Indicator
• Housing Material: CRC / MS Sheet duly Powder Coated
• Optional: All S. Steel on request, thermostat in place of ER
• Duty Cycle: Continuous
• Power Consumption : 220/230V AC Supply 50Hz Single Phase

HOT PLATE SIZE AVAILABLE & RATING :

• 7.5” diameter
• 10"x12"x6" (250 x 300 x 150 mm) : 1.5 kW
• 16"x10"x6" (400 x 250 x 150 mm) : 1.5 kW
• 18"x12"x6" (450 x 300 x 150 mm) : 1.5 kW
• 18"x24"x6" (450 x 600 x 150 mm) : 1.5 kW