STATIC CONE PENETROMETER (ENGINE DRIVEN) CAPACITY 100 KN (10000KGF):

IS 4968 (PART III)

Introduction:

• For reaching greater depths and to facilitate easy and constant rate of penetration 1 to 2.5cm/sec of the cone this engine-driven Static Cone Penetrometer of 100 KN (10,000 Kgf) capacity is preferable.
• The equipment consists of a hydraulic pump driven by a Diesel Engine.
• The whole system is mounted on a tow able trolley fitted with pneumatic wheels.
• The pumping unit and ram are connected by means of flexible pipes through a direction control valve.
• The hydraulic ram moves on a two pillar stand mounted on a trolley.

General Description and Specifications: Complete With The Following:

• Penetration Cone: steel 60 cone angle, 10cm2 base area, with friction jacket (One)
• Mantle Tube: 36mm uniform OD with sounding Rod working length 1 m (Thirty)
• Load Measuring Head: with Automatic cut-off valve, and oil can without pressure gauges (One)
• Pressure Gauge: 0-600 x 5 kg/cm (One)
• Pressure Gauge: 0 100 x 1kg/cm (One)
• Trusses:  (Two)
• Screw Anchor: 45 cm Six
• Screw Anchor: 30 cm Six
• Screw Anchor: 20 cm Six
• Screw Anchor Rod with cone: Six
• Driving handle for Screw Anchor: One
• Extension Pipe for Handle: Four
• Clamping Screw with Nuts: Six
• Extractor Tube with Connector: One
• Tarpaulin Cover: One