DIRECT SHEAR (MOTORISED SINGLE SPEED):
AS PER IS: 2720 (Part - Vlll), ASTM D- 3080.
Electrically operated to give a single constant rate of strain of 1.25 mm/min. Suitable for 230 V A.C.
Introduction:
-
Information of Shear values plays an important role in the design of sub-structures in determining bearing capacity of soils, design of retaining walls, instability calculation of earth slopes etc.
-
Various Shear Apparatus are available and Direct Shear Apparatus is one of them.
-
In Direct Shear test specimen contained in a box is subjected to a constant normal load and increasing horizontal load is applied to the upper section of the specimen.
-
Shear force and load are directly measured.
-
For determination of the direct shear strength of soils on specimen size 60 mm x 60mm x 25 mm.
-
Electrically operated to give a single constant rate of strain of 1.25 mm/min. Suitable for 230 V A.C.
General Description and Specifications:
-
Loading Unit : with V strips on which shear box housing rests, load yoke with direct and lever system for applying normal load to the capacity of 8 kg/cm sq, fixture for proving ring, bracket for holding dial gauge, and electrically operated to give a single constant rate of strain of 1.25 mm/min. Suitable for 230 V A.C. Complicated counter balancing arrangement has been dispensed with and the unit is provided with pre-calibrated loading yoke.
-
Shear Box Assembly for Square Specimen: Comprising Direct Shear box in two halves for a square specimen size 60 x 60 x 25 mm one pair of plain gripper plates, one pair of perforated gripper plates, one pair of porous stones, one top loading pad. Shear box housing: Accommodates the Direct Shear Box assembly.
-
Shear Box Housing: Suitable to accommodates shear box assembly complete with two ball roller strips.
-
Specimen Cutter: For cutting specimen size 60 x 60 x 25 mm obtained from field or from larger specimen.
-
Set of Weights: To give normal stress of 3 kg/cm sq on specimen through lever as follows:
-
0.05 kg/cm2 - 4 Nos.
-
0.1 kg/cm2 - 1 No.
-
0.2 kg/cm2 - 1 No.
-
0.5 kg/cm2 - 3 Nos.
-
1.0 kg/cm2 - 1 No.
-
Proving Ring: High sensitivity compression Made of special alloy steel equipped proving Ring capacity 200 kg (2 KN) with dial gauge 0.01 mm x 25 mm.
Optional extras:
-
Additional set of weights to give a normal stress of 5 kg/cm2.
-
Soil Sampler for 60 mm x 60 mm specimen and test from pad of 50.
-
Spares: Porous stone for 60 mm x 60 mm size sample available in pairs.