Model No. XS-03 : CUT SECTION MODEL OF ENGINE, TRANSMISSION SYSTEM & END DRIVE:
Maximum parts and accessories of an engine cylinder, cylinder head, Inlet and Exhaust manifolds, self-starter, Magneto charger, Water pump, etc, are sectioned to show the internal constructional details.
It consists of a Clutch and gearbox assembly, the casing of which is suitably cut to demonstrate its operation. The circuit from the pedal to the Clutch is active and will help to demonstrate systems. The gearbox is coupled to Differential gear box with an axle and the different coupling used for this transmission can be demonstrated. The gear shifting including the forward and reverse gear operation can be clearly shown. The speed variation and the rotation of the Differential gear box can be seen while gear shifting.
The Fuel tank is cut to expose the mounting of the level sensor and the position of Fuel section. The system is complete with Fuel pump.
It consists of Exhaust Manifold and silencer in cut section to explain internal construction.
It consists of the engine Lubrication system along with the Lubrication oil pump.
This will explain both the Suspension systems at the front and the leaf spring Suspension at the Rear. One of the hydraulic arrangements of Suspension mechanism is highlighted (with Shock absorbers) and explained cut sectionally.
Braking mechanism is operational. The movement of the Brake Shoes on operating the pedals can be seen in the area where the Brake drum is cut. The Rear brakes cannot be demonstrated hydraulically but it is shown using hand Braking system that is by using cables.
This can be seen and included in the Steering handle, Steering gear and coupling at the wheels.