TORSION TESTING MACHINE FOR WIRES:

AS PER IS: 1717 The number of twists required to fracture a wire sample can be determined rapidly with this machine.

• The standard machine consists of a gear box coupled with a motor to give output of 30, 60 or 90 rpm.
• A revolution counter indicates the total number of twists, and stops counting when the sample fails.
• The distance between the rotating and non-rotating chuck can be between 1-500 mm length.
• The wire is held in between these two chucks.
• The wires from 1 to 12 mm can be tested with this machine.
• The machine is electrically operated suitable for operation on 400/440 volts, 3 phase, A.C. supply.
• The machine is available in two models one for testing wires in the range of 1-5mm and the other 4-10 mm.