The machine is used for mounting Metallographic Specimens in a suitable thermoplastic or thermosetting material. Mounting makes the samples convenient for handling in subsequent polishing operations. Mounting of specimen is also essential where the edges of samples are to be preserved for examinations.
General Description and Specifications:
It is a screw press comprising of 1” dia. mould of alloy steel, heat-treated and internally ground. Both the main plunger and top plunger are also of heat-treated alloy steel suitably hardened and ground. The ramming action is obtained by means of a ratchet Lever provided at the front. Drive is through a pair of hardened steel crown wheel and pinion gears. The crown wheel is fitted on a heavy duty thrust ball bearing. A screw type lock with handle is provided for quick fixing of top plunger on mould during operation.
Specimen Mounting Press has concentric heating and cooling arrangement on the mould, ensuring a quick turn-out of samples. The processing time per sample is only 15 minutes maximum. Heating is by means of 400 watts heater and cooling by water circulation around the mould.
Standard Mould Diameter is 1” (1¼” diameter mould, optional). Extra mould assemblies of any diameter, not exceeding 50mm. can also be supplied at an extra cost.
Provided with Energy Regulator, Pilot Lamp and Three Core Cable and Plug Pin.
Finished in high gloss enamel and chrome plating.
Size: 12” x 12” x 19” approx.
Send us Enquiry
Office: S. N. 37/02, "Ashtavinayak Indl. Estate",
Parvati Nagar, Dhayari Narhe Road,
Next to Pari Robotics, Narhe, Pune-411041
Tel fax: (020) 24690312, Email: email@example.com, firstname.lastname@example.org