ACCELERATED CURING TANK:

AS PER IS:9013.

General Description:

• Small to large capacity Suitable for 6, 12 & 24 Moulds
• Heater Immersion type high grade quality having silent zone on the top S S 304 grade fitted with kanthal A-1 heater for years of life & easy of use.
• Drain plug Model of Brass duly nickled having handle for outlet of water is fitted on the back side.
• Full feature with Digital Temp. Controller Cum Indicator or PID (microprocessor Based)
• Stability of Temp. ± 1°C or better (in PID ± 0.5°C or better)
• Better mineral / Glass wool insulation
• Best quality SS 304 grade Inside Tank duly argon welded (leak proof)
• Heavy duty insulated gate / Lid with handle for lifting, fitted with SS hinges
• S S perforated heavy gauge 304 grade diffuser plate.
• Angle Iron Frame at bottom with castor wheel is provided for easy Movement
• Tullu Pump for Circulation (Optional)

Applications: For curing of Moulds etc.

Models / Cap. Available:

1.  Capacity : 12 Moulds
2.  Capacity : 6 Moulds
3.  Capacity : 24 Moulds

Technical Parameters:

• Control Panel            : Temp. Controller, mains indicator & Temp. Indicator / Tullu Pump (Optional) for 6 moulds
• Temp. Range             : Ambient to 100°C
• Stability                    : ± 1°C or better (in PID ± 0.5°C or better)
• Housing Material       : CRC / MS sheet duly powder coated with angle frame.
• Insulation                 : Glass / mineral wool.
• Power Supply            : 220/230V. AC Single Phase