LOS ANGELES ABRASION TESTING MACHINE:
AS PER IS: 2386 (Part IV) ASTM: C 131, AASHO T96.
Introduction:
Determination of aggregate abrasion value. Used for testing crushed rock, crushed slag, crushed and uncrushed gravel for resistance to abrasion.
General Description and Specifications:
Consists of : -
-
A hollow steel cylinder, closed at both ends, having an inside diameter of 700 mm and inside length of 500 mm.
-
The cylinder mounted on a sturdy frame on ball bearings.
-
The opening will be closed dust tight with a removable bolted cover in place.
-
A detachable shelf which extends throughout the drum catches the abrasive charge and does not allow it to fall on the cover.
-
The drum is rotated at a speed of 30-33 RPM by an electric motor through a heavy duty reduction gear. Fitted with revolution counter and push button starter.
-
Supplied complete with a tray for collection of the material.
-
Abrasive Charge Consists of set of 12 Nos. cast iron spheres or steel spheres (Hardened steel balls) approximately 48 mm diameter each weigh between 390-445 gm.
-
Complete as above. Suitable for operation on 440 volts, 3 phase, 50 cycles, A.C. supply.