VIBRATING TABLE:

Introduction:

The Vibrating Table is used for compacting concrete cubes and cylinders.

General Description and Specifications:

• It is designed to carry a load of 140 kg.
• The apparatus consists of a motor fitted with a variable pitch pulley housed in a cabinet.
• The vibrations are imparted by means of off-balance masses rotating on a shaft of a vibrator clamped to the underside of the table top.
• The table top is 50cm x 50cm. and has stops along its edges to prevent moulds from walking off the table during vibration.
• A cross arm adjustable on a vertical rod at the center of the table is provided to hold the moulds while operating the table.
• The variable pitch pulley arrangement permits the frequency to be varied stepless between a maximum of 3600 vibrations down to 2600 vibrations per minute.
• A speed regulation handle is provided for increasing or decreasing the frequency.
• A switch is provided for starting the motor.
• Suitable for operation on 220-240 volts, 1 phase, 50 cycles, A.C. supply.

Note: available Sizes of Vibrating Tables

• size 50cm x 50cm
• size 75cm x 75cm
• Size 100cm x 100cm.