FLEXURE TESTING MACHINE (MOTORISED) RILEM-CEMBUREAU TEST





Description:

 

FLEXURE TESTING MACHINE (MOTORISED) RILEM – CEMBUREAU TEST:

AS PER IS: 1727 & 4031-1968; ASTM C 109.

 

Introduction: It is used for testing 40mm x 40mm x 160mm mortar specimens for flexural strength. (Rilem Cembureau Test) by single point loading.

 

General Description and Specifications:

  • It is a motorized, mechanical unit.
  • The speed is adjusted so that the load increase on the specimen is between 4 to 6 kg/sec.
  • A flexure test attachment for keeping the specimen in position is also supplied.
  • This consists of two rollers 10mm. diameter and spaced 100mm apart, and a third roller of the same diameter equidistant from the first two and for transmitting the applied load to the opposite face of the prism.
  • The unit is for operation on 230 Volts, single phase, 50 cycles A.C. supply.
  • Loads are measured on a proving ring fitted with a sensitive dial gauge. Supplied without proving Ring.

 

Accessory: Proving Ring, capacity 500 KN.

 

 

Send us Enquiry








Visit Us

Office: S. N. 37/02, "Ashtavinayak Indl. Estate", Parvati Nagar, Dhayari Narhe Road, Next to Pari Robotics, Narhe, Pune-411041
Tel fax: (020) 24690312,
Email: sales@xeepl.com, xeepl.pune@gmail.com

Lets Visit

Become a Facebook Fan