FLEXURE TESTING MACHINE (HAND OPERATED):





Description:

 

FLEXURE TESTING MACHINE (HAND OPERATED):

AS PER IS: 516 BS 1881, ASTM C78.

 

Introduction:


Flexural tests of concrete beam have their own importance in concrete Road Constructions as well as Buildings constructions. Normally concrete beams of sizes 10 cm x 10 cm x 50 cm or 15 cm x 15 cm x 70 cm are tested for flexural strength.

 

General Description and Specification:

 

  • The machine consists of a hand operated load frame.
  • The lower platen has two rollers, the distance between which is adjustable.
  • For 150mm x 150mm x 700mm beam, the centre to centre distance between the rollers is 600 mm, while it is 400mm for beams of size 100mm x 100mm x 500mm.
  • The upper platen has also a pair of rollers whose distance is adjustable.
  •  It is 200 mm center to center for 150mm x 150mm x 700mm size beam and 133mm for 100mm x 100mm x 500 mm size beam.
  • A pressure gauge to indicate load is fixed on the load frame.
  • A small pumping unit is attached to the load frame.
  • Total capacity of the machine is 100 KN and a 150 mm dia pressure gauge - 100 KN x 1 KN is fitted on the machine.
  • Since this is a hand operated light weight machine, it is useful for field laboratory also.

 

Send us Enquiry








Visit Us

Office: S. N. 37/02, "Ashtavinayak Indl. Estate", Parvati Nagar, Dhayari Narhe Road, Next to Pari Robotics, Narhe, Pune-411041
Tel fax: (020) 24690312,
Email: sales@xeepl.com, xeepl.pune@gmail.com

Lets Visit

Become a Facebook Fan